1. Filtration Settings #

Clear Comfort should be ON during the filtration cycle (the Clear Comfort system’s Green Status Light should be ON).

• Preferred filtration time: 24 hours/day (standard for most spas with dedicated circulation pumps)
• Minimum recommended filtration time: 12 hours/day

NOTE: Most factory preset times are set to 2 hours twice a day, consult owners manual to change to 6 hours twice a day.

2. Water Care #

• Important: Start with clean, fresh spa water. Spa spurge products are recommended. Upon filling with new water, always shock with chlorine to sanitize the tub.
• Clear Comfort’s powerful oxidation process can reduce residual levels & the need for shock treatments.
• Regularly maintain the following water chemical levels at:
  • pH: 7.2 – 7.6
  • Alkalinity: 80 – 120 ppm
  • Calcium Hardness: 50 – 250 ppm
  • Chlorine: 0.5 – 3 ppm
• You may shock your spa after high use periods, if needed.

3. Filtration Maintenance #

• Maintain and clean filters per your spa manufacturer’s recommendations.
• For high use spas cleaning may need to be done at more frequent intervals.

NOTE: A dirty filter can have a negative effect on water quality & reduce air flow through the Clear Comfort system.