Video: Clear Comfort Commercial AOP Pool System Overview #

Key Features #

The CCW300 Clear Comfort system can be pole or wall mounted. Holes on the back panel can be drilled to meet your installation requirements. The CCW500 Clear Comfort system is floor standing and should not be wall mounted, but it can be secured to floor for seismic safety. A 10 ft. power cord is included. The system is normally tied to the circuit controlling the pump operations or is plugged into a GFCI protected outlet. See the specification label on inside of door.

Operating Ranges #

• Weight:
  • CCW300/CCW300A: 40 lbs.
  • CCW500: 90 lbs.
• Installation Location:  
  • Unit must be installed within 15 feet from the Venturi injection site and mounted in a clean, protected area.
• Ambient Temperature:  
  • 40°F – 90°F (5°C – 40°C)
• CCW300A
  • Maximum Flow Rate: 350 GPM
  • Power: 20 Watts
  • Current Sensor: 0.25 Amp to 15 Amp
  • Electrical Requirements: 120V, 60Hz or 240V, 60Hz*
  • Electrical Rating: 120V, 60Hz, 1.5 Amp or 240V, 60Hz, 0.75 Amp*
• CCW300
  • Maximum Flow Rate: 700 GPM
  • Power: 40 Watts
  • Current Sensor: 0.25 Amp to 15 Amp
  • Electrical Requirements: 120V, 60Hz or 240V, 60Hz*
  • Electrical Rating: 120V, 60Hz, 1.5 Amp or 240V, 60Hz, 0.75 Amp*
• CCW500
  • Maximum Flow Rate: 2,000 GPM
  • Power: 120 Watts
  • Current Sensor: 0.25 Amp to 15 Amp
  • Electrical Requirements: 120V, 60Hz or 240V, 60Hz*
  • Electrical Rating: 120V, 60Hz, 2.5 Amp or 240V, 60Hz, 1.25 Amp*

* See the specification label on inside of door

NOTE: CLEAR COMFORT SHOULD ONLY RUN WHEN THE PUMP IS OPERATING.